Motorola RAZR V3 사용자 설명서

connections

receive files from another 
device

Note: If you do not see the Bluetooth indicator 

O

 a 

the top of your phone’s display, turn on your phone’s 
Bluetooth power (see page 50).

  

Place your phone near the device, and send the 
file from the device. (If necessary, refer to the 
user’s manual for the device for instructions.)

If your phone and the sending device don’t 
recognize each other, place your phone in 
discovery mode so the sending device can 
locate it (see page 51).

When prompted to accept the sent object, scroll 
to Yes and press the center key

s

.

Your phone notifies you when the transfer is 
complete. If necessary, press Save to save the file.

disconnect from a device

Scroll to Bluetooth and select Off.

set Bluetooth options

Find it: s

 >

w

Settings > Connection 

> Bluetooth Link > Setup

TTY operation

You can use an optional TTY device with your 
phone to send and receive calls. You must plug the 
TTY device into the phone’s headset jack and set the 
phone to operate in one of three TTY modes.

Note: Use a TSB-121 compliant cable (provided by the 
TTY device manufacturer) to connect the TTY device 
to the phone.

Note: Set the phone volume to level 4 (middle setting) 
for proper operation. If you experience a high number 
of incorrect characters, adjust the volume as needed 
to minimize errors.

Note: For optimal performance, your phone should be 
at least 12 inches (30 centimeters) from the TTY 
device. Placing the phone too close to the device may 
cause high error rates.