Freedom9 2400 사용자 설명서

  

 4

The following items can be found on the front panel of the freeConnect 2400 (Figure 2-3). 

 

 

Power LED 

This indicator will light up green when the switch is receiving power. 

The LED for each port will light up green when the port is connected to an active device, and will 
flash when data is being transmitted or received. 

The LED for each port will light up green when the port is connected to a device that supports 
100Mbps Fast Ethernet.  If there is no connection or the connection is only 10Mbps Ethernet, 
the LED will be off. 

These ports support automatic MDI/MDIX crossover detection which gives you true ‘plug and 
play’ capability when it comes to using straight-through cables or crossover cables.  With this 
feature, you won’t have to worry about whether you need a straight-through or crossover 
network cable, the freeConnect 2400 will automatically detect the type of cable and compensate 
for it if necessary. 

The AC power receptacle is located on the rear panel of the freeConnect 2400 (Figure 2-4).  
The receptacle is a three-pronged connector that connects to the power cable included with the 
unit. Supported input voltage ranges are 100-240 AC at 50-60Hz.