Uniden udw10003 사용자 설명서

20

Check near the camera for one of the common 

interference sources.

Try moving the camera away from a suspected 

source, or try moving the suspected source so it’s 

not between the camera and the receiver.

Try moving closer to the receiver. There is always 

more noise at the edges of the receiver’s range.

-

-

-

Check near the receiver for the source of 

interference.

Try moving the receiver away from a 

suspected source, or turn off the source if 

possible.

Try raising the receiver’s antenna so it 

stands straight up.

-

-

-

You should only reset your system under the following conditions:

You are unable to pair the camera to the 

receiver.

The image on the screen is frozen.

-

-

The buttons on the receiver are not 

responding.

The image on the screen is frozen, and 

resetting the camera did not help.

-

-

To reset the camera or receiver:

Unplug the AC adapter and make sure the power is off.
Extend the antenna and locate the hole for the reset button.
Insert a small object (like a pencil point or an unbent paper clip) into the hole and gently press 
in.
Reconnect the AC adapter and let the battery charge fully.

1.
2.
3.

4.