DYMO 1000 사용자 가이드

3

With your new DYMO RhinoPRO

™

 1000 label 

printer, you can create a wide variety of high-
quality, self-adhesive labels. You can choose to 
print your labels in many different sizes and styles. 
The printer uses RhinoPRO Industrial label 
cassettes in widths of 3/8” (9 mm) and 1/2” 
(12 mm). RhinoPRO Label cassettes are also 
available in a wide range of materials.
Visit www.dymo.com/industrial for information on 
obtaining labels and accessories for your printer.

Please complete the warranty registration card and 
return it to the appropriate customer service 
address within seven days. Visit www.dymo.com/
industrial for details.

Follow the instructions in this section to start 
printing your first label.

The printer uses six AAA batteries. To save power, 
the printer will automatically turn off after two 
minutes of inactivity.
To insert the batteries
1. Press the thumb catch on the back of the printer 

to open the battery compartment door. See 
Figure 2.

2. Insert the batteries following the polarity 

markings (+ and –).

3. Close the battery compartment door.

Remove the batteries if the printer will not be 

used for a long period of time.

Your printer comes with one label cassette. Visit 
www.dymo.com/industrial for information about 
purchasing additional label cassettes.
To insert the label cassette
1. Slide the latch to open the label cassette door. 

See Figure 3.

The first time you use the printer, remove 

the protective cardboard insert from between the 
print head and pinch roller. 

2. Make sure the label and ribbon are taut across 

the mouth of the cassette and that the label 
passes between the guideposts. If necessary, 
turn the spool clockwise to tighten the label. See 
Figure 3.

3. Insert the cassette with the label and ribbon 

positioned between the print head and pinch 
roller. See Figure 4.

cardboard

Turn spool to

insert

Remove

tighten label

Slide latch

to open