Yamaha RX-V567 사용자 가이드
En
66
SETUP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
menu
1
Switch this unit to the standby mode.
2
Press A while pressing and holding STRAIGHT on
the front panel.
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu items are
displayed.
the front panel display.
After approximately a few seconds, the top menu items are
displayed.
3
Use PROGRAM l / h to select the item to be set
from the following items.
from the following items.
In the Advanced Setup menu, you can set the following settings.
4
Press STRAIGHT repeatedly to select the value you
want to change.
want to change.
5
Switch this unit to the standby mode, and then
switch it on again.
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
initialization is selected, it will be performed when the unit is
powered on again.
Setting the impedance of speakers
(U.S.A. and Canada models only)
(U.S.A. and Canada models only)
Changes the unit settings depending on the impedance of the
speakers connected.
speakers connected.
J3
Avoiding crossing remote control signals
when using multiple Yamaha receivers
when using multiple Yamaha receivers
The remote control of the unit can only receive signals from a
receiver which has an identical ID (remote control ID). When using
multiple Yamaha AV receivers, you can set each remote control
with a unique remote control ID for its corresponding receiver.
On the contrary, if you are setting the same remote control ID for
all receivers, you can use one remote control to operate 2 receivers.
receiver which has an identical ID (remote control ID). When using
multiple Yamaha AV receivers, you can set each remote control
with a unique remote control ID for its corresponding receiver.
On the contrary, if you are setting the same remote control ID for
all receivers, you can use one remote control to operate 2 receivers.
Extended functionality that can be configured as needed (Advanced Setup menu)
PHONES
SILENT CINEMA
TONE CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
INFO
MEMORY
PRESET
FM
AM
YPAO MIC
STRAIGHT
PROGRAM
l / h
A
SP IMP.
J1
Sets the impedance of speakers.
REMOTE ID
Changes the remote control ID of a receiver.
BI-AMP
Switches the bi-amp connections on or off.
MON.CHK
Removes the up-scaling limitation on HDMI video
output.
TU
J2
Selects one of the following FM/AM frequency steps.
INIT
Initializes various settings for this unit.
6 MIN
Select the impedance when 6
Ω speakers are
connected.
8 MIN (Default)
Select the impedance when speakers above 8
Ω are
connected.
SPIMP.-8MIN
ID1 (Default)
Receives the remote control signals set in ID1.
ID2
Receives the remote control signals set in ID2.
ID1 is set for both remote control and receiver by default. To
avoid crossing remote control, change the remote control ID for
both remote control and receiver.
avoid crossing remote control, change the remote control ID for
both remote control and receiver.
REMOTEID-ID1
Continues to the
next page
J
1 :
U.S.A. and Canada models only.
J
2 :
Asia and General models only.
J
3 :
For detailed procedures of speaker impedance settings, refer to “(U.S.A. and
Canada models only) Changing speaker impedance” (
Canada models only) Changing speaker impedance” (