Yamaha RX-V567 사용자 가이드
En
67
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
High quality playback using bi-
amplification connections
amplification connections
Switches the bi-amp connections on or off. Refer to “Bi-
amp connection for front speakers” (
amp connection for front speakers” (
) for details.
Removing HDMI video output up-
scaling limits
scaling limits
Removes the up-scaling limitation on analog video
resolution when this unit and a TV are connected via
HDMI jacks.
If a resolution supported by the monitor cannot be
detected when configuring the up-scaling settings, this
setting will remove the output limitation.
resolution when this unit and a TV are connected via
HDMI jacks.
If a resolution supported by the monitor cannot be
detected when configuring the up-scaling settings, this
setting will remove the output limitation.
Changing FM/AM frequency steps
(Asia and General models only)
(Asia and General models only)
You can select one of the following FM/AM frequency
steps:
steps:
J1
Initializing various settings for this
unit
unit
Initializes various settings stored in this unit and sets it
back to default.
Select the items to be initialized from the following.
back to default.
Select the items to be initialized from the following.
i
SETUP
l
Numeric keys
n
CODE SET
SETUP
7
8
5
6
9
0
10
1
2
3
4
ENT
CODE SET
RECEIVER
SCENE
OPTION
RETURN
VOLUME
ENHANCER SUR. DECODE
STRAIGHT
DIRECT
HDMI
AV
AUDIO
TRANSMIT
SLEEP
1
2
3
4
1
2
3
4
1
2
5
6
V-AUX
TUNER
FM
INFO
MEMORY
AM
PRESET
TUNING
MOVIE
MUSIC
STEREO
BD
DVD
TV
CD
RADIO
MUTE
ENTER
REC
TV
TV VOL
TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
INPUT
MUTE
DOCK
[ A ]
[ B ]
n
l
i
■ To change the remote control ID
1
Press
nCODE SET
on the remote control
using a pointed object such as the tip of a
ballpoint pen.
ballpoint pen.
2
Press
iSETUP
on the remote control.
3
Enter the desired remote control ID code.
To switch to ID1:
Enter “5019” using
Enter “5019” using
l
Numeric keys
.
To switch to ID2:
Enter “5020” using
Enter “5020” using
l
Numeric keys
.
Once the remote control code is registered
successfully the remote control will blink twice.
successfully the remote control will blink twice.
Perform each of the following steps within
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
1 minute. Settings will be automatically stopped if
more than 1 minute passes since the last operation.
To reset, repeat from step 1.
TRANSMIT
RECEIVER
HDMI
SLEEP
SOURCE
CODE SET
Registration successful: blinks twice
Registration failed: blinks 6 times
• If setup fails, repeat from step 1.
• Returns to ID1 after the remote control code is
initialized (
ON
Turns bi-amp connections on.
OFF (Default)
Turns bi-amp connections off.
YES (Default)
Video output signals of a resolution not
supported by the TV will not be
transmitted.
SKIP
This unit ignores the TV’s support
capability and transmits input video
signals to the TV.
BI-AMP-OFF
MON.CHK-YES
AM10/FM100
You can adjust the AM frequency by
steps of 10kHz and FM by steps of
100kHz.
AM9/FM50
(Default)
(Default)
You can adjust the AM frequency by
steps of 9kHz and FM by steps of 50kHz.
DSP PARAM
Initializes all parameters for the sound
field programs.
VIDEO
Resets video conversion settings
(resolution/aspect ratio) in the Setup
menu and the OSD menus display
position.
ALL
Resets this unit to default factory settings.
CANCEL (Default)
Does not initialize.
TU-AM9/FM50
INIT-CANCEL
J
1 :
For details on setting FM/AM frequency steps, refer to “FM/AM
tuning” (
tuning” (