Zhone 5100 참조 매뉴얼
Ethernet WAN commands
Vpacket 5100/6100 Series Reference Manual
87
Example of viewing the Ethernet WAN interface:
In this example, no configurable settings are available through the show wan command. However,
the show ip command shows the IP address and net mask for the Ethernet WAN interface. If
DHCP is enabled the Ethernet WAN interface is identified as such.
Example for viewing WAN statistics:
Example for viewing WAN statistics:
In this example, you can view the following statistics:
•
•
number of received errors
•
number of packets received
•
number of packets sent
•
number of packets busy
•
number of packets waiting to be transmitted
•
number of received errors at the ISR
VPacket# show wan
-------------- Ethernet Settings --------------
There are no configurable settings.
-----------------------------------------------
VPacket# show ip
ACTIVE indicates this is the current operational setting
CONFIG indicates this has been configured but not activated
-------------------------IP INTERFACE----------------------
INTERFACE NAME IP ADDRESS NET MASK
ACTIVE lan 160.100.100.1 255.255.255.0 Not NATed
ACTIVE wan 172.168.8.160 255.255.255.0 dhcp
ACTIVE Default Gateway 172.168.8.1
ACTIVE Voice Ip Address 172.168.8.160
-----------------------------------------------------------
VPacket#
VPacket# show wan statistics
WAN Ethernet receive errors : 0
WAN Ethernet packets received : 24879023
WAN Ethernet packets sent : 24810486
WAN Ethernet packets busy : 0
WAN Ethernet waiting transmit : 0
WAN Ethernet receive errors at ISR : 0