ZyXEL N4100 사용자 가이드
N4100 User’s Guide
81
C
H A P T E R
6
Server
6.1 Overview
This chapter describes how to configure the Server screens.
6.1.1 What You Can Do in this Chapter
• Use the Server screen (
) to set the embedded web
server, the LAN DHCP server and specify the e-mail server for e-mail redirection
on the N4100.
• Use the Static DHCP Table screen (
) to assign IP
addresses on the LAN to specific individual computers based on their MAC
Addresses.
6.1.2 What You Need to Know
The following terms and concepts may help as you read through the chapter.
WWW (HTTP and HTTPS)
HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL)
is a web protocol that encrypts and decrypts web pages. Secure Socket Layer
(SSL) is an application-level protocol that enables secure transactions of data by
ensuring confidentiality (an unauthorized party cannot read the transferred data),
authentication (one party can identify the other party) and data integrity (you
know if data has been changed).
is a web protocol that encrypts and decrypts web pages. Secure Socket Layer
(SSL) is an application-level protocol that enables secure transactions of data by
ensuring confidentiality (an unauthorized party cannot read the transferred data),
authentication (one party can identify the other party) and data integrity (you
know if data has been changed).
It relies upon certificates, public keys, and private keys (see
for more information).
HTTPS on the N4100 is used so that you may securely access the N4100 using the
web configurator. The SSL protocol specifies that the SSL server (the N4100) must
always authenticate itself to the SSL client (the computer which requests the
HTTPS connection with the N4100), whereas the SSL client only should
authenticate itself when the SSL server requires it to do so (select Enable in the
ADVANCED > AUTHENTICATION screen to authenticate client certificates). If
web configurator. The SSL protocol specifies that the SSL server (the N4100) must
always authenticate itself to the SSL client (the computer which requests the
HTTPS connection with the N4100), whereas the SSL client only should
authenticate itself when the SSL server requires it to do so (select Enable in the
ADVANCED > AUTHENTICATION screen to authenticate client certificates). If