ZyXEL p-660h-61 사용자 가이드

Prestige 660H Series User’s Guide 

30-12  

Filter Configuration 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After you have created the filter set, you must apply it. 

Enter 11 in the main menu to display menu 11 and type the remote node number to edit. 

Go to the Edit Filter Sets field, press [SPACE BAR] to choose Yes and press [ENTER]. 

This brings you to menu 11.5. Apply the example filter set  (for example, filter set 3) in this menu 

as shown in the next section. 

 

 

 

 

 

 

Menu 21.1.6.1 - TCP/IP Filter Rule 

 

Filter #: 6,1 
Filter Type= TCP/IP Filter Rule 
Active= Yes 
IP Protocol= 6      IP Source Route= No 
Destination: IP Addr= 0.0.0.0 
IP Mask= 0.0.0.0 
Port #= 23 
Port # Comp= Equal 
                 Source: IP Addr= 0.0.0.0 
IP Mask= 0.0.0.0 
Port #=  
Port # Comp= Equal 
TCP Estab= No 
More= No             Log= None 
Action Matched= Drop 
Action Not Matched= Forward 

 
 

Press ENTER to Confirm or ESC to Cancel: 

 

 

Press [SPACE BAR] to choose this 

filter rule type. The first filter rule 

type determines all subsequent filter 

types within a set. 

Select Yes to make the rule active. 

6 is the TCP protocol. 

The port number for the telnet 

service (TCP protocol) is 23. See 

RFC-1060 for port numbers of well-

known services. 

Select Equal here 

as we are looking 

for packets going 

to port 23 only. 

There are no 

more rules to 

check. 

Select Drop here so that the 

packet will be dropped if its 

destination is the telnet port. 

Select Forward here so that the packet will be forwarded if 

its destination is not the telnet port and there are no more 

rules in this filter set to check.  Select Next if there are 

more rules to check.