ZyXEL p-660h-61 사용자 가이드
Prestige 660H Series User’s Guide
30-14
Filter Configuration
Figure 30-14 Filtering Ethernet Traffic
30.7.2 Remote Node Filters
Go to menu 11.5 (shown next) and type the number(s) of the filter set(s) as appropriate. You can
cascade up to four filter sets by typing their numbers separated by commas. The factory default filter
set, NetBIOS_WAN, is inserted in the protocol filters field under Call Filter Sets in menu 11.5 to
block local NetBIOS traffic from triggering calls to the ISP.
cascade up to four filter sets by typing their numbers separated by commas. The factory default filter
set, NetBIOS_WAN, is inserted in the protocol filters field under Call Filter Sets in menu 11.5 to
block local NetBIOS traffic from triggering calls to the ISP.
Figure 30-15 Filtering Remote Node Traffic
Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters=
device filters=
protocol filters= 3
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 6
device filters=
Output Filter Sets:
protocol filters= 2
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL: