ZyXEL nbg-4615 사용자 가이드
Chapter 12 WISP Mode
NBG4615 User’s Guide
106
12.5.1 Static WEP
Use this screen if the access point to which you want to connect to uses WEP
security mode.
security mode.
Figure 69 WEP (WISP)
The following table describes the labels in this screen.
Table 38 WEP (WISP)
LABEL
DESCRIPTION
WISP Parameters
SSID
SSID
Enter the name of the access point to which you are connecting.
Channel
Selection
Selection
The range of radio frequencies used by IEEE 802.11b/g/n wireless devices
is called a channel. The device will automatically select the channel with
the least interference.
is called a channel. The device will automatically select the channel with
the least interference.
Security
Mode
Mode
Select Static WEP to enable data encryption.
PassPhrase
Enter a Passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is
further converted by the NBG4615 into a complicated string that is
referred to as the “key”. This key is requested from all devices
wishing to connect to a wireless network.
WEP
Encryption
Encryption
Select 64-bit WEP or 128-bit WEP.
This dictates the length of the security key that the network is going to
use.
use.
ASCII
Select this option in order to enter ASCII characters as WEP key.