ZyXEL nbg-4615 사용자 가이드
Chapter 28 Maintenance
NBG4615 User’s Guide
234
28.9 System Operation Mode Overview
The Sys OP Mode (System Operation Mode) function lets you configure your
NBG4615 as an access point, wireless client or both at the same time. You can
choose between Router, Access Point Mode, Universal Repeater Mode, and
WISP Mode depending on your network topology and the features you require
from your device.
NBG4615 as an access point, wireless client or both at the same time. You can
choose between Router, Access Point Mode, Universal Repeater Mode, and
WISP Mode depending on your network topology and the features you require
from your device.
The following describes the device modes available in your NBG4615.
Router
A router connects your local network with another network, such as the Internet.
The router has two IP addresses, the LAN IP address and the WAN IP address.
The router has two IP addresses, the LAN IP address and the WAN IP address.
Figure 140 LAN and WAN IP Addresses in Router Mode
Access Point
An access point enabled all ethernet ports to be bridged together and be in the
same subnet. To connect to the Internet, another device, such as a router, is
required.
same subnet. To connect to the Internet, another device, such as a router, is
required.
Figure 141 Access Point Mode