ZyXEL nbg-4615 사용자 가이드

 Chapter 28 Maintenance

NBG4615 User’s Guide

Note: If you uploaded the default configuration file you may need to change the IP 

address of your computer to be in the same subnet as that of the default 
NBG4615 IP address (192.168.1.2). See 

 for details on 

how to set up your computer’s IP address.

System restart allows you to reboot the NBG4615 without turning the power off. 

Click Maintenance > Reset/Restart to open the following screen. 

Figure 139   Maintenance > Reset/Restart

Click Restart to have the NBG4615 reboot. This does not affect the NBG4615's 
configuration.

Upload 

Click Upload to begin the upload process.

Note: Do not turn off the NBG4615 while configuration file upload is in 

progress.

After you see a “configuration upload successful” screen, you must then 
wait one minute before logging into the NBG4615 again. The NBG4615 
automatically restarts in this time causing a temporary network 
disconnect.

If you see an error screen, click Back to return to the Backup/Restore 
screen.

Reset

Pressing the Reset button in this section clears all user-entered 
configuration information and returns the NBG4615 to its factory defaults.

You can also press the RESET button on the rear panel to reset the factory 
defaults of your NBG4615. Refer to the chapter about introducing the Web 
Configurator for more information on the RESET button.

Table 85   Maintenance > Backup/Restore (continued)