ZyXEL NBG-417N 사용자 설명서

 Chapter 22 Sys OP Mode

NBG-417N User’s Guide

Use this screen to select how you connect to the Internet. 

Figure 114   Maintenance > Sys OP Mode > General 

If you select Router Mode, the following pop-up message window appears.

Figure 115   Maintenance > Sys Op Mode > General: Router 

• In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN 

Ethernet ports have different IP addresses. 

• The DHCP server on your device is enabled and allocates IP addresses to other 

devices on your local network. 

• The LAN IP address of the device on the local network is set to 192.168.1.1.
• You can configure the IP address settings on your WAN port. Contact your ISP or 

system administrator for more information on appropriate settings.

If you select Access Point the following pop-up message window appears.

Figure 116   Maintenance > Sys Op Mode > General: AP 

• In AP Mode all Ethernet ports have the same IP address. 
• All ports on the rear panel of the device are LAN ports, including the port labeled 

WAN. There is no WAN port.