ZyXEL NBG-417N 사용자 설명서

Chapter 22 Sys OP Mode

NBG-417N User’s Guide

• The DHCP server on your device is disabled. In AP mode there must be a device 

with a DHCP server on your network such as a router or gateway which can 

allocate IP addresses.

The IP address of the device on the local network is set to 192.168.1.2.

The following table describes the labels in the General screen.

Table 63   Maintenance > Sys OP Mode > General 

Note: If you select the incorrect System Operation Mode you cannot connect to the 

Internet.

System Operation Mode
Router 

Select Router if your device routes traffic between a local network and 
another network such as the Internet. This mode offers services such as a 
firewall or content filter.

Access Point

Select Access Point if your device bridges traffic between clients on the 
same network.

Apply

Click Apply to save your settings.

Reset

Click Reset to return your settings to the default (Router)