ZyXEL 793H 사용자 가이드

Chapter 15 Remote Management Configuration

P-793H User’s Guide

"

In this example a.b.c.d is the IP address of CNM Access. You must change 
this value to reflect your actual management server IP address or domain 
name. See 

for detailed descriptions of the commands.

Figure 107   Enabling TR-069 

The following table gives a description of TR-069 commands. 

ras> wan tr069 load
ras> wan tr069 acsUrl a.b.c.d
Auto-Configuration Server URL: http://a.b.c.d
ras> wan tr069 periodicEnable 1
ras> wan tr069 informInterval 2400
TR069 Informinterval 2400
ras> wan tr069 active 1
ras> wan tr069 save

Table 79   TR-069 Commands

wan

tr069

All TR-069 related commands must be preceded 

by wan tr069.

load

Start configuring TR-069 on your ZyXEL Device.

active [0:no/
1:yes]

Enable/disable TR-069 operation. 

acsUrl <URL>

Set the IP address or domain name of CNM 

Access. 

username 
[maxlength:15
]

Username used to authenticate the device when 

making a connection to CNM Access. This 

username is set up on the server and must be 

provided by the CNM Access administrator.

password 
[maxlength:15
]

Password used to authenticate the device when 

making a connection to CNM Access. This 

password is set up on the server and must be 

provided by the CNM Access administrator.

periodicEnabl
e [0:Disable/
1:Enable]

Whether or not the device must periodically send 

information to CNM Access. It is recommended to 

set this value to 1 in order for the ZyXEL Device to 

send information to CNM Access.

informInterva
l [sec]

The duration in seconds of the interval for which 

the device MUST attempt to connect with CNM 

Access to send information and check for 

configuration updates. Enter a value between 30 

and 2147483647 seconds. 

save

Save the TR-069 settings to your ZyXEL Device.