ZyXEL 793H 사용자 가이드

 Chapter 28 NAT Setup

P-793H User’s Guide

The following table describes the fields in this menu.

Use the address mapping sets menus and submenus to create the mapping table used to assign 
global addresses to computers on the LAN and the DMZ. Set 255 is used for SUA. When you 
select Full Feature in menu 4 or menu 11.3, the SMT will use the address mapping set that 
you specify. When you select SUA Only, the SMT will use the pre-configured Set 255 (read 
only).
A server set is a list of LAN servers mapped to external ports. To use this set, a server rule 
must be set up inside the NAT address mapping set. Please see the section on port forwarding 
in 

 

for further information on these menus. To configure NAT, enter 

15 from the main menu to bring up the following screen.

Figure 166   Menu 15: NAT Setup

Enter 1 to bring up Menu 15.1.1 - Address Mapping Sets.

Table 110   Applying NAT in Menus 4 & 11.3

Network 

Address 

Translation

When you select this option the SMT will use the specified address 

mapping set (menu 15.1 - see 

for further 

discussion). You can configure any of the mapping types described in 

. Choose Full Feature if you have multiple public 

WAN IP addresses for your ZyXEL Device.
When you select Full Feature you must configure at least one address 

mapping set.

Full 

Feature

NAT is disabled when you select this option.

None

When you select this option the SMT will use Address Mapping Set 255 

(menu 15.1 - see 

). Choose SUA Only if you 

have just one public WAN IP address for your ZyXEL Device.

SUA Only

                               Menu 15 - NAT Setup

                    1. Address Mapping Sets
                    2. NAT Server Sets