ZyXEL 793H 사용자 가이드

Chapter 34 Firmware and Configuration File Maintenance

P-793H User’s Guide

Figure 218   Restore Using FTP Session Example

to read about configurations that disallow TFTP and FTP 

over WAN.

Restore configuration via console port by following the HyperTerminal procedure shown next. 
Procedures using other serial communications programs should be similar.

1 Display menu 24.6 and enter “y” at the following screen.

Figure 219   System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started. 

Figure 220   System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the 

following screen.

Figure 221   Restore Configuration Example

4 After a successful restoration you will see the following screen. Press any key to restart 

the ZyXEL Device and return to the SMT menu.

ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit

Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):

Starting XMODEM download (CRC mode) ...CCCCCCCCC

Type the configuration file’s location, 

or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.