ZyXEL 793H 사용자 가이드

 Chapter 34 Firmware and Configuration File Maintenance

P-793H User’s Guide

Figure 222   Successful Restoration Confirmation Screen

This section shows you how to upload firmware and configuration files. You can upload 
configuration files by following the procedure in 

 or by following the 

instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File 
(for console port).

1

Do not interrupt the file transfer process as this may PERMANENTLY 
DAMAGE YOUR ZyXEL Device. 

FTP is the preferred method for uploading the firmware and configuration. To use this feature, 
your computer must have an FTP client. 
When you telnet into the ZyXEL Device, you will see the following screens for uploading 
firmware and the configuration file using FTP.

Figure 223   Menu 24.7.1: System Maintenance - Upload System Firmware

You see the following screen when you telnet into menu 24.7.2.

Save to ROM
Hit any key to start system reboot.

            Menu 24.7.1 - System Maintenance - Upload System Firmware

  To upload the system firmware, follow the procedure below:

    1. Launch the FTP client on your workstation.
    2. Type "open" and the IP address of your system.  Then type "root" and
       SMT password as requested.
    3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
       of your firmware upgrade file on your workstation and "ras" is the
       remote file name on the system.
    4. The system reboots automatically after a successful firmware upload.

  For details on FTP commands, please consult the documentation of your FTP
  client program. For details on uploading system firmware using TFTP (note
  that you must remain on this menu to upload system firmware using TFTP),
  please see your manual.