MicroBoards pf3-1000 사용자 가이드

 

 

o

  Power Button – The Power button turns the PF-3 Print Factory on and off.  It may take a few 

seconds for the PF-3 Print Factory to turn on after you press the Power button   

o

  Power On LED – This LED will show green when the power to the printer is on.   

o

  Cancel Button – Pressing the Cancel button cancels the current print job. 

o

  Out of Media Indicator Button – Pressing this button will clear any media feed issues.  This 

button has an LED that will flash amber when a media feed issue is occurring.   

o

  Out of Ink LED – This LED will be on if the cartridges are missing or if there is an issue with 

either of the cartridges.  

The PF-3 Print Factory will accept CD or DVD 120 mm (12 cm) inkjet printable discs.  If the disc does 
not have an inkjet printable surface, the ink will not adhere to the surface of the disc.  The PF-3 Print 
Factory will only accept 12 cm discs.  Business card or 8 cm discs are not supported by this 
system. 

 

       

 

 

Figure 1  

 

 

 

                Figure 2 

Load the first 5 or 6 discs flat, as seen in figure 1. 

Load the rest of the discs at an angle, against the wide input rod, as seen in figure 2. 

The PF-3 Print Factory will hold a maximum of 100 discs.  DO NOT load more than 100 discs in the 
system, as this may cause the discs to load incorrectly.