KitchenAid kdrp467kss 설치 설명서
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF
OFF
OFF
OFF
3
Parts supplied for
installation
Product
Dimensions
Cabinet Opening
Dimensions
36" (91.4 cm)
cooktop width
cooktop width
36" (91.4 cm)
width
9-1/4"
(23.5 cm)
anti-tip
brackets
1-3/4"
(4.4 cm)
1"
(2.5 cm)
2 - #10 x 2"
phillips head screws
36" (91.4 cm)
cooktop
height with
feet loosened
3/4 turns
cooktop
height with
feet loosened
3/4 turns
45" (114.3 cm)
overall height
overall height
13" (33 cm) max.
upper cabinet depth
1/4" (6.4 mm)
spacer
26-1/2" (67.3 cm)
width with
control panel
• Anti-tip bracket must be securely
attached to a wall stud. Thickness of
finished wall may require using
longer screws to anchor the bracket.
finished wall may require using
longer screws to anchor the bracket.
• L.P. conversion kit is included in
literature package.
• Backguard and island trim. The
backguard included with the range
must be installed when a standard
24” (61 cm) deep base cabinet is
used and there is zero clearance
between the back edge of range
and combustible rear wall.
must be installed when a standard
24” (61 cm) deep base cabinet is
used and there is zero clearance
between the back edge of range
and combustible rear wall.
For island installations or other
installations with more than 5"
(12.7 cm) clearance to back wall,
use the optional stainless steel
island trim, included with the range,
to cover the backguard mounting
flanges.
installations with more than 5"
(12.7 cm) clearance to back wall,
use the optional stainless steel
island trim, included with the range,
to cover the backguard mounting
flanges.
36" (91.4 cm) min.
upper cabinet width
36-1/4" (92.1 cm)
opening width
3-1/2"
(8.9 cm)
20"
(50.8 cm)
12"
(30.5 cm)
5-1/2" (14 cm)
8"
(20.3 cm)
18" (45.7 cm)
upper cabinet
to countertop
gas line opening to be
located in this area
junction box to be
located in this area
4" (10.2 cm) min.
clearance from both sides
of range to side wall or
other combustible
material above cooking
surface
clearance from both sides
of range to side wall or
other combustible
material above cooking
surface
0" (0 cm) clearance from
both sides and back of
range to adjacent
combustible construction
below cooking surface
both sides and back of
range to adjacent
combustible construction
below cooking surface
*Note: 42" (106.7 cm) min. when bottom of wood or metal
cabinet is protected by not less than 1/4" (0.64 cm)
flame retardant millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
flame retardant millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
48" (121.9 cm) min. clearance between the top of the
cooking platform and the bottom of an unprotected wood
or metal cabinet.
cooking platform and the bottom of an unprotected wood
or metal cabinet.
For minimum
clearance to top of
range, see Note.*
clearance to top of
range, see Note.*
28"
(71.1 cm)
10.2 cm
(4 po)