Pyle plcd87 사용자 매뉴얼
5
To Reinstall the Front Panel
1. When the panel bracket is in slide
down position, insert the front panel
into panel bracket and press OPEN
button to slide up.
into panel bracket and press OPEN
button to slide up.
2. When the panel bracket is in slide up
position, insert a side of the front
panel to its proper position and push
the other side into the panel bracket,
a ‘click’ sound should be heard.
panel to its proper position and push
the other side into the panel bracket,
a ‘click’ sound should be heard.
3. Note that if the front panel fails to lock
in position properly, pressing control
button may not function and display
may be missing some segments.
Press the OPEN button and then
reinstall the front panel again.
button may not function and display
may be missing some segments.
Press the OPEN button and then
reinstall the front panel again.
USING THE DETACHABLE FRONT PANEL
To Detach the Front Panel
1. Press the OPEN button, the front
panel will slide down.
2. Press the OPEN button again, the
front panel will slide up.
3. When the front panel slides down,
press the bottom button of the front
panel upward and pull it out from the
panel bracket.
panel upward and pull it out from the
panel bracket.
4. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
immediately after being removed.
Open
Open
Bottom
Button
Bottom
Button
Protective Case
Front Panel
Front Panel