JVC GZ-MG630 사용자 가이드
68
EN
Troubleshooting
(Continued)
Trouble
Action
Other pr
ob
lems
lems
The camcorder operates
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
•
If there are many fi les (such as video) in the camcorder, it takes
time for the camcorder to respond. It is recommended that you
copy all fi les from the camcorder onto your computer, and erase
the fi les from the camcorder.
copy all fi les from the camcorder onto your computer, and erase
the fi les from the camcorder.
The lamp does not fl ash
during battery pack
charging.
during battery pack
charging.
•
Check the remaining battery pack charge.
(When the battery pack is fully charged, the lamp does not fl ash.)
•
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery pack is being recharged outside the permitted
temperature range, recharging may stop to protect the battery
pack.)
pack.)
The remote control does
not work.
not work.
•
Replace the battery.
•
Set [REMOTE] to [ON].
•
The remote control may not operate outdoors or in places
exposed to strong light.
GZ-MG680
When connecting to
the HDMI cable, the
image or sound does
not appear on the TV
properly.
the HDMI cable, the
image or sound does
not appear on the TV
properly.
•
When connecting to the HDMI cable, the image or sound may not
appear on the TV properly depending on the TV connected. In
such cases, perform the following operations.
such cases, perform the following operations.
1)
Disconnect the HDMI cable and connect it again.
2)
Turn off and on the camcorder again.
GZ-MG680
HDMI-CEC functions do
not work properly, and
the TV does not work
in conjunction with the
camcorder.
not work properly, and
the TV does not work
in conjunction with the
camcorder.
•
TVs may operate differently depending on the specifi cations,
even if they are HDMI-CEC compliant. Therefore, the HDMI-CEC
functions of the camcorder cannot be guaranteed to operate in
combination with all the TVs. In such cases, set [HDMI CONTROL]
to [OFF].
functions of the camcorder cannot be guaranteed to operate in
combination with all the TVs. In such cases, set [HDMI CONTROL]
to [OFF].
GZ-MG680
The language on the
display changed.
display changed.
•
It may occur when you connect the camcorder to a TV with
different language setting using an HDMI cable.
If a malfunction occurs in the HDD
! Perform [FORMAT HDD]. (All data is deleted.)
# If this does not solve the problem, perform the disc check function from a PC after formatting.
$ If this does not solve the problem, contact the JVC customer service for repairs.
! Perform [FORMAT HDD]. (All data is deleted.)
# If this does not solve the problem, perform the disc check function from a PC after formatting.
$ If this does not solve the problem, contact the JVC customer service for repairs.
To reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
# Execute [FACTORY PRESET]. (
墌 p. 62)
䡵
䡵