Canon JX200 설치 설명서

QT5-0849-V01

a

 Open the Printer Cover and remove the protective materials.

The actual protective materials may differ in shape, quantity, and position from the ones 

shown in the illustration above.

b 

Connect the Handset to the jack, and place it in its cradle.

There is a groove 

on the bottom of the 

machine to hold the 

handset cord.

c 

Connect the telephone line and any necessary external device.  

For more details, see “Step 5” on the back of this sheet.

Connect the telephone 

line cord to the wall jack. 

You can connect 

an external device 

(telephone or answering 

machine) if necessary.

d

 Plug the power cord into the back of the machine and connect 

the other end to a power outlet.

1

a 

Lift the Printer Cover until it locks into place.  

b 

When the Printer Cover is opened, the Cartridge Holder will 

move to the left.

c 

Prepare the FINE Cartridge.

Remove the 

FINE Cartridge 

from its package.

Remove the protective tape.  

When doing so, 

DO NOT TOUCH 

the metallic areas.

DO NO TOUCH.

e 

Press [ON/OFF].

Press [Start/Copy].

f 

Use [{] or [}] on the Operation Panel to select the language 

for the LCD, then press [Start/Copy].

Press [{] or [}] to select the language.

Press [Start/Copy].

2

d 

Insert the FINE Cartridge slightly slanted into the Cartridge 

Holder.

e 

Push up the FINE Cartridge until it clicks into place.

DO NOT put the head of the FINE Cartridge downward 

into the Cartridge Holder.

f 

Close the Printer Cover.

Wait until the preparation 

operation is completed: this takes 

about one to two minutes.

• Please confirm the included items against the illustration printed on the lid of the packing box.

For the instructions for Loading Paper, 

Setting RECEIVE Mode, Connecting the 

Machine, and Replacing the Cartridge.