Canon JX200 설치 설명서

3

a 

Open the Document Cover and extend the Paper Support to 

support the paper.

b 

Squeeze, then slide the Paper Guide to the left.

c 

Tap the edge of the stack on a flat surface to even the stack.

d 

Insert the stack face up into the Multi-Purpose Tray  , and 

align the right edge of the stack with the right side of the Multi-

Purpose Tray.  Then slide the Paper Guide   snugly against 

the left edge of the stack.

Be careful not to press the Paper Guide strongly against the stack, or the 

paper will not be fed properly.

e 

Adjust the Document Guide to the width of the document, and 

gently insert the top of the document face up into the Document 

Tray until you hear a beep.

4

Press [Receive Mode/Resolution] to change the receive mode.
For details on ANS.MACHINE MODE, refer to “Receiving 

Documents with an Answering Machine: ANS.MACHINE MODE” 

in “Receiving Faxes” of the User’s Guide.
For details on DRPD, refer to “Receiving with a DRPD (Distinctive 

Ring Pattern Detection) service: DRPD” in “Receiving Faxes” of 

the User’s Guide.

●

 

Pick up the Handset to 

answer the call.

Press [Start/Copy].

Rings for every call, regardless of whether the call is a fax call or a voice 

call.  For a fax call, you have to manually activate reception of the fax.

●

 

Pick up the Handset to 

answer the call.

Receives documents 

automatically.

Automatically switches between fax and voice calls.  

Receives documents automatically and rings for voice calls.

●

 

Answers all calls as fax calls. 

Receives documents automatically and disconnects voice calls.

●

 

Record an outgoing message. 

Press [TAM] to set TAM MODE.  The fax receives documents automatically.
To hear the recorded messages, press [Play].  Refer to “Playing Telephone 

Messages” in “Using TAM Mode” of the User’s Guide.
You may change the number of times the phone rings before the answering 

machine answers a call.  Refer to “Setting TOLL SAVER” in “Using TAM 

Mode” of the User’s Guide.
If the LCD displays “TAM MEMORY FULL” when you turn the answering 

system on, please delete some of the messages stored in memory.  Refer 

to “Deleting a Document from Memory” in “Receiving Faxes” of the User’s 

Guide.

5

Typical examples of connecting the machine are described 

below.  The machine cannot send/receive faxes if the connection 

is incorrect.  Connect the machine correctly. 

●

 

●

(A) Telephone line (analog)

(A)

●

(B)  Asymmetric Digital Subscriber Line

(C)  Splitter

(D)  ADSL modem (splitter may be built-in to the modem)

(E)  Computer

(B)

(E)

(D)

(C)

●

(F)  ISDN line

(G) Terminal adapter, etc.

(H)  Analog port

(I)  Computer

(F)

(I)

(H)

(G)

●

 

●

(J)  Telephone or Answering machine

(J)

Take off the protective tape on the back of the machine when you connect 

an external device.

When the ink is empty, the LED blinks.  When this occurs, you cannot 

print out any documents in memory.  Replace the FINE Cartridge 

with new one.  Refer to “Replacing a FINE Cartridge” in “Routine 

Maintenance” of the User’s Guide.

Replace the FINE 

Cartridge.

The LED blinks.

When the ink level is low, the LED lights up.  In this state the FAX will 

receive documents to memory (up to 30 transactions or 120 pages 

(FAX-JX200/JX201: 60 pages)).  To print all unprinted documents 

in memory select <PRINT ALL NEW RX> from the <MEMORY 

REFERENCE> menu.  After printing, delete unnecessary faxes from 

the memory.  Refer to “Documents Stored in Memory” in “Receiving 

Faxes” of the User’s Guide.

XXXXXXXX 

 

 

 

© CANON INC. 2007  

 

 

 

PRINTED IN THAILAND 

 

 

Press [MENU].

The LED lights up.

For details on ISDN connection and settings, see the manuals supplied 

with your terminal adapter or dial-up router.

For details on ADSL connection and settings, see the manual supplied with 

your ADSL modem.  The illustrated connection is an example and is not 

guaranteed to suit every connecting condition.

The TAM Lamp lights up.