Canon JX200 사용자 가이드

Sending Faxes

„

Sequential broadcasting sends one document to more than one location.
You can send to a total of 70 locations as follows:

You can enter the one-touch speed dialing and coded speed dialing locations in any order. You 
simply press the one-touch speed dialing button, or press [Coded] or [Directory] followed by the two-
digit code.
You can also include one location using regular dialing. Remember that when using regular dialing, 
you must press [Start/Copy] after entering the number.

Load the document face up into the Document Tray.

See “Loading Documents and Paper” on page 16.
You can set the scanning resolution and contrast (see page 20).

Dial the receiving party’s fax numbers as you need.

You can also press [Redial] to redial the last number dialed with the numeric buttons.

Press [Start/Copy].

z

The fax reads the document into memory and begins sending.

z

To cancel a transmission, press [Stop] during dialing or transmission. All transmissions in 
the sequence are canceled.

z

One-touch speed dialing

z

Coded speed dialing

z

Regular dialing (Numeric buttons dialing)

=  9 locations
=  60 locatitons
=   1 location

z

You must press each button within 10 seconds of the preceding one. The fax begins the operation 

approximately 10 seconds after you press the last button.

z

The regular dialing number must be entered last.

TEL=

3456xxxx