Canon MF5750 사용자 가이드

Setting the Receive Mode

Receiv

ing F

a

x

e

s

- <DRPD> to distinguish between fax and voice calls by using Distinctive Ring Pattern 

Detection.(See “Receiving with a DRPD (Distinctive Ring Pattern Detection) Service: 
DRPD,” on p. 5-5.)

- <Manual> for the connected telephone to ring for fax and voice calls. Fax calls must 

be answered manually. (See “Receiving Faxes Manually: Manual Mode,” on p. 5-7.)

NOTE

If you set <5. MAN/AUTO SWITCH> to <ON> in <FAX SETTINGS> of the Menu, the 
machine will receive faxes automatically even when the receive mode is set to <Manual>. 
(See <5. MAN/AUTO SWITCH> of “Menu Descriptions,” on p. 8-5.)

NOTE

You can save the toner consumption when printing out the received documents. (See 
Chapter 10, “Machine Settings,” in the Basic Guide.)

If you want to select <FaxOnly>, check the following:

■ Select This Mode If:

•

you have a dedicated telephone line for fax use only.

•

you only want to receive faxes automatically with the machine.

■ You Will Need to:

•

set <FaxOnly>. (See “Setting the Receive Mode,” on p. 5-1.)

•

connect the machine to a dedicated telephone line. (See “Connect the telephone cable 
and necessary external device,” in the Set-Up Instructions (for MF5750 users) or Set-Up 
Instructions for the Machine (for MF5770 users).)

■ When You Receive a Fax Call

The machine will receive the fax automatically.

■ When You Receive a Voice Call

You will not be able to answer the call.

NOTE

•

If you connect a telephone to the machine and enable the <INCOMING RING> setting, 
the telephone will ring when the machine receives a voice call, and then you can answer 
the call.

•

You can select the number of rings. (See <4. INCOMING RING> of “Menu Descriptions,” 
on p. 8-4.)