Canon MF5750 사용자 가이드

Setting the Receive Mode

5-4

Receiv

ing F

Press [ (-)] or [ (+)] to select <FAX/TEL OPT. SET>

➞ press [Set]

twice.

Press [ (-)] or [ (+)] to select the time 0 to 30 seconds that the
machine takes to check whether a call is fax or voice call

➞ press

[Set] twice.

Press [ (-)] or [ (+)] to select the length of time 15 to 300
seconds that the machine rings when the call is a voice call

➞

press [Set] twice.

Press [ (-)] or [ (+)] to select whether the machine switches to
receive mode or disconnects the call if no one answers a voice
call after the specified time in step 6

➞ press [Set].

You can select from the following:

- <RECEIVE> to switch to receive mode

- <DISCONNECT> to disconnect the call

Press [Stop/Reset] to return to the standby display.

Receiving When an Answering Machine Is Connected:
AnsMode

If you want to select <AnsMode>, check the following:

■ Select This Mode If:

•

you only have one telephone line for both fax and telephone use.

•

you want to receive faxes automatically and receive voice messages on your answering
machine.

■ You Will Need to:

•

set <AnsMode>. (See “Setting the Receive Mode,” on p. 5-1.)

•

connect an answering machine to the machine. (See “Connect the telephone cable and
necessary external device,” in the Set-Up Instructions (for MF5750 users) or Set-Up
Instructions for the Machine (for MF 5770 users).)

NOTE

Follow the guidelines below to adjust the answering machine: