Canon bjc-6000 사용자 설명서
Loading Paper
You can stack paper in the sheet feeder to load it automatically, or you can manually feed
one sheet at a time through the manual feed slot.
one sheet at a time through the manual feed slot.
You can place approximately 130 sheets of plain paper (20 lb or 64 g/m
2
) in the sheet
feeder at a time.
You can stack approximately 30 sheets of transparency film or 10 sheets of glossy photo
paper in the sheet feeder. However, these special media may not advance correctly under
unusual environmental conditions (such as extreme temperatures or humidity). If you
have trouble with special papers becoming skewed or feeding multiple sheets, do not
stack them in the sheet feeder. Manually feed them one sheet at a time.
paper in the sheet feeder. However, these special media may not advance correctly under
unusual environmental conditions (such as extreme temperatures or humidity). If you
have trouble with special papers becoming skewed or feeding multiple sheets, do not
stack them in the sheet feeder. Manually feed them one sheet at a time.
Automatically Feeding Paper
Prepare the printer.
Make sure the printer is turned
on.
on.
Pull the paper support up until
it stops.
it stops.
Lower the paper output tray
and pull out its extension.
and pull out its extension.
Make sure the paper
thickness lever is in the
up position
thickness lever is in the
up position
Fan the paper.
For best results, fan the paper
before loading it.
before loading it.
Always fan a stack of paper
along the edge that will feed
into the printer first.
along the edge that will feed
into the printer first.
Paper Handling
Chapter 3
Paper Handling
3-7
LOAD LIMIT MARK