Canon bjc-6000 사용자 설명서

Slide the stack of paper into
the sheet feeder until it stops.

Align the edge of the paper
with the right edge of the sheet
feeder.

Secure the stack with the paper
guide.

Make sure the stack does not
exceed the limit mark.

Make sure that the printer is turned on.

Use the printer driver to set any necessary print properties; for example, you need
to change the settings in the printer driver if you are printing photos or using
special paper.

When automatically feeding stacks of paper, follow these guidelines:

■

Do not open the front cover while printing. This will cause the printer to
pause.

■

Do not leave paper stacked in the printer for long periods of time; longer
sheets of paper may become bent or curled over time. This may cause the
paper to misfeed or jam.

■

If your printed page contains lots of graphics, the ink on the page may be
damp due to the print density. Remove the page right away and allow the ink
to dry.

■

The capacity of the paper output tray is 130 sheets of paper. To reduce paper
jams, remove paper from the output tray before the count reaches 130.

3-8

Chapter 3

D