Canon n1000 설치 설명서
Setting Up the Printer
12
1-12
Note
Network Connection
The computer can be connected via its LAN port to a network using
10BASE-T/100BASE-TX protocols. For a network connect, the printer
LAN port is connected to the network HUB. The optional Network Interface
Board NB-11FB must be installed in the standard model of this printer
before the printer can be connected to a network. (Æ P.2-7)
10BASE-T/100BASE-TX protocols. For a network connect, the printer
LAN port is connected to the network HUB. The optional Network Interface
Board NB-11FB must be installed in the standard model of this printer
before the printer can be connected to a network. (Æ P.2-7)
1
Press on the lever to remove the connector cover on the back of the
printer.
printer.
z Store the connector cover in a safe place. The connector cover must be re-attached
after the LAN cable is disconnected or before moving the printer.
2
Connect the LAN cable to the LAN port.
Press in until you hear a click.
Press in until you hear a click.
00_J80xSG_Eng.book Page 12 Saturday, April 13, 2002 11:28 AM