Canon lbp5970 사용자 가이드

41

This section describes the procedures for turning the printer ON and 

checking the printer operation.

IMPORTANT

•

Do not turn the printer ON immediately after turning it OFF. If you want to 

turn the printer ON again after turning it OFF, wait at least 10 seconds after 

turning the printer OFF before turning it ON again.

•

If the printer does not operate properly or an error message appears, see 

•

Be sure to set the paper cassette in the printer before you turn the power 

ON for the first time after you install the printer.

NOTE

When you turn the power ON for the first time after you install a hard disk 

or when a problem has occurred to the hard disk, the printer is ready to 

print after approximately 60 seconds after it is turned ON because the 

hard disk is formatted after the printer is turned ON.

The indicators and display on the control panel come on, and the printer initiates a 

self-diagnostic test on the printer unit and optional accessories.

If no abnormality is found during the self-diagnostic test, the Online indicator, 

Ready indicator and Paper Source indicator for the currently selected paper source 

come on, <00 READY> appears in the display, and the printer is ready to print.

The following information is displayed in the display.

Online

Feeder Selection

Ready

Job

Job

Power

Reset

Utility

Settings

Message

Cancel Job

HDD

Main Power

OK

Online

Indicator

Paper Source 

Indicators

Ready

Indicator

00    READY      A4

Printable and not 
processing print data

Size of paper in the 
currently selected 
paper source