Canon lbp5970 사용자 가이드

43

If the printer does not operate even after turning it ON or print Configuration 

Page Print properly, the following causes are conceivable.

The default value of the language used in the display is [ENGLISH].

You can change the display language to [FRENCH], [GERMAN], [ITALIAN], or 

[SPANISH] using the following procedure.

The printer cannot be 
turned ON.

The power plug is 
unplugged from the AC 
power outlet.

Plug the power plug into 
the AC power outlet.

There is a break in the 
power cord.

If the printer is turned ON 
after replacing the power 
cord with the one that is of 
the same type and is used 
for other device, there is a 
break in the power cord. In 
this case, purchase a new 
power cord and replace it 
with the broken one.

The indicators on the 
control panel do not come 
on.

The printer is not ON.

Turn the printer ON.

The printer is in Power 
Save Mode.

The printer will be ready to 
print after you send print 
data or press any key on 
the control panel.

The printer does not 
operate.

The printer is offline.

Press [Online] to turn on 
the Online indicator. 

The interface cable is 
disconnected.

Connect the interface cable 
firmly to the interface 
connectors on the 
computer and printer unit.

A paper jam occurs each 
time you print.

The amount of the paper 
loaded in the paper 
cassette or multi-purpose 
tray exceeds the load 
limitation.

Reduce the amount of 
paper to within the load 
limitation and print again.

Paper is not loaded 
properly in the paper 
cassette or multi-purpose 
tray.

Load the paper properly 
and print again.

Unusable paper is loaded 
in the paper cassette or 
multi-purpose tray.

Replace the paper with one 
that can be used and print 
again.

There is still jammed paper 
inside the printer.

Remove any jammed 
paper and print again.

Nothing is printed on the 
paper.

Multiple sheets of paper 
were fed at a time.

Align the paper stack in the 
paper cassette or multi-
purpose tray properly and 
load it again. If you are 
using coated paper or 
labels, fan them thoroughly 
and load them again.

Any drum cartridge was 
installed with the sealing 
tape still attached.

Take the drum cartridge out 
of the printer, pull out the 
sealing tape, and then 
reinstall the drum cartridge.

The Message indicator is 
on and a message is 
displayed in the display.

Some problem has 
occurred.

See "Chapter 7 
Troubleshooting" in 

 

User's Guide and solve the 
problem.