Nortel 4134 설치 설명서
56
Installing Secure Router 4134 hardware components
Connecting the console port cable
You use the console port to perform initial system configuration.
The following figure shows a laptop connected to the console port on the
rear of the Secure Router 4134.
rear of the Secure Router 4134.
Figure 22
Connecting a local terminal to the console port
Connecting a local terminal to the console port
To access the command line interface (CLI) using the rear panel console
port, connect a terminal or a workstation running terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
port, connect a terminal or a workstation running terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
Average time to connect the console port cable to a local terminal: 1 minute.
Prerequisites
•
Ensure you have the supplied console cable ready to install.
•
Ensure you have the supplied female DB-9 to RJ-45 adapter if you
require it for connection to your terminal or PC.
require it for connection to your terminal or PC.
•
Ensure you have the Secure Router 4134 securely installed in the
equipment rack.
equipment rack.
Procedure steps
Step
Action
1
Insert the male RJ-45 connector in the console port on the rear
panel of the Secure Router 4134.
panel of the Secure Router 4134.
2
Connect the female DB-9 to RJ-45 adapter to the opposite end of
the console cable, if necessary.
the console cable, if necessary.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301
01.02
Standard
10.0
7 August 2007
Copyright © 2007, Nortel Networks
.