Nortel 4134 Instrução De Instalação
56
Installing Secure Router 4134 hardware components
Connecting the console port cable
You use the console port to perform initial system configuration.
The following figure shows a laptop connected to the console port on the
rear of the Secure Router 4134.
rear of the Secure Router 4134.
Figure 22
Connecting a local terminal to the console port
Connecting a local terminal to the console port
To access the command line interface (CLI) using the rear panel console
port, connect a terminal or a workstation running terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
port, connect a terminal or a workstation running terminal emulation
software to the Secure Router 4134 using the console cable that ships
with the unit.
Average time to connect the console port cable to a local terminal: 1 minute.
Prerequisites
•
Ensure you have the supplied console cable ready to install.
•
Ensure you have the supplied female DB-9 to RJ-45 adapter if you
require it for connection to your terminal or PC.
require it for connection to your terminal or PC.
•
Ensure you have the Secure Router 4134 securely installed in the
equipment rack.
equipment rack.
Procedure steps
Step
Action
1
Insert the male RJ-45 connector in the console port on the rear
panel of the Secure Router 4134.
panel of the Secure Router 4134.
2
Connect the female DB-9 to RJ-45 adapter to the opposite end of
the console cable, if necessary.
the console cable, if necessary.
Nortel Secure Router 4134
Installation — Hardware Components
NN47263-301
01.02
Standard
10.0
7 August 2007
Copyright © 2007, Nortel Networks
.