Nortel 4000 사용자 가이드
Managing Remote Access Concentrators Using Annex Manager
Chapter 5 Booting and Resetting RACs
5-2
To boot a RAC:
1.
Create a RAC list and select one or more RACs (page 2-1).
2.
Select
Boot
from the Configure menu.
The
Boot
window appears (
). You cannot return to the
main window unless you close the
Boot
window. The Boot Window
on page -4 provides information about each option.
3.
Choose the
Boot Option
you need.
Figure 5-1. Boot Window
4.
Enter information in the
Boot
window text fields.
Text fields may be required or may not be available, depending on
the
the
Boot Option
you choose. Text fields are described on page 5-5.
If you selected:
•
Immediate
,
Diagnostic
, or
Save in Flash
you can enter text in
the
Pref Load Addr, Boot Image
, and
Boot Message
fields.
•
Delayed
you must complete the
Boot Time
field. You can enter
a time in HH:MM format, or you can enter a plus sign (+)
followed by a time in HH:MM format to indicate an amount
of time in the future. You can enter text in the
followed by a time in HH:MM format to indicate an amount
of time in the future. You can enter text in the
Pref Load Addr
,
Boot Image
, and
Boot Message
fields.