Nortel 15000 설치 설명서
Installing an External AC Power Unit
2-2
308687-B Rev 00
Attaching the Antistatic Wrist Strap
The Versalar routers ship with an antistatic wrist strap. You must wear this strap
whenever you remove, install, and handle power supplies.
whenever you remove, install, and handle power supplies.
The antistatic wrist strap directs the discharge of static electricity from your body
to the chassis of the switch, thereby avoiding discharge to, and possible damage
of, sensitive electronic components.
to the chassis of the switch, thereby avoiding discharge to, and possible damage
of, sensitive electronic components.
To attach the antistatic wrist strap:
1.
Locate the antistatic wrist strap in the shipping container.
2.
Verify that the cable is attached to the wrist strap.
3.
Place the strap around your wrist.
4.
Adjust the strap to ensure that the metal buckle inside the strap touches
your skin.
your skin.
5.
Attach the alligator clip as follows:
•
If you are using the Versalar 15000, attach the strap to the front
ground clip as shown in Figure 2-1.
ground clip as shown in Figure 2-1.
•
If you are using the Versalar 25000, use proper grounding techniques
and attach the strap to the front or rear of the chassis as shown in
and attach the strap to the front or rear of the chassis as shown in
Caution:
Electrostatic discharge can damage hardware. Follow the procedure
in this section to protect your equipment from damage.