Nortel 15000 참조 가이드
show logical-line vc stats
116
308689-B Rev 00
show logical-line vc stats
The
show logical-line vc stats
command displays all packet and octet statistics
collected for a specified frame relay virtual circuit (VC). Only IP packets are
included.
included.
This command allows for the following options:
The output includes the following information:
-slot
<slot_number>
Displays QoS statistics for the specified slot only.
-name
<circuit_name>
Displays QoS statistics for the specified circuit only.
<circuit_name>
Displays QoS statistics for the specified circuit only.
Logical line over Mct3 vc stats
Name
User-defined name for the logical line.
Slot/Conn/Chan/Index
Identifies the slot, DS3 connector, DS1 channel, and the
index for this line instance.
The index ranges from 1 to 24 (for T1) and 1 to 31 (for
E1). This number differentiates multiple logical lines
configured on the same DS1.
index for this line instance.
The index ranges from 1 to 24 (for T1) and 1 to 31 (for
E1). This number differentiates multiple logical lines
configured on the same DS1.
Dlci
The number of the circuit on which DLCI is configured.
RxBelowCIR
Packets/Octets/Tx Packets
Packets/Octets/Tx Packets
Number of packets/octets received below the committed
information rate (CIR), and number of Tx packets
transmitted.
information rate (CIR), and number of Tx packets
transmitted.
RxAboveCIR
Packets/Octets/Tx Drops
Packets/Octets/Tx Drops
Number of packets/octets received that exceeded the
CIR, but were within the allocated burst rate (BR), and
number of packets that should have been transmitted, but
that were dropped due to lack of buffering resources.
CIR, but were within the allocated burst rate (BR), and
number of packets that should have been transmitted, but
that were dropped due to lack of buffering resources.
RxAboveBR
Packets/Octets/Tx Octets
Packets/Octets/Tx Octets
Number of packets/octets received that exceeded the
allocated BR and number of octets transmitted.
allocated BR and number of octets transmitted.