Nortel 15000 参考指南

show logical-line vc stats

116

308689-B Rev 00

The

command displays all packet and octet statistics 

collected for a specified frame relay virtual circuit (VC). Only IP packets are 
included. 

This command allows for the following options:

The output includes the following information: 

-slot 

<slot_number>

Displays QoS statistics for the specified slot only. 

-name 

<circuit_name>

Displays QoS statistics for the specified circuit only. 

<circuit_name>

Displays QoS statistics for the specified circuit only.

Name

User-defined name for the logical line. 

Slot/Conn/Chan/Index

Identifies the slot, DS3 connector, DS1 channel, and the 
index for this line instance. 
The index ranges from 1 to 24 (for T1) and 1 to 31 (for 
E1). This number differentiates multiple logical lines 
configured on the same DS1. 

Dlci

The number of the circuit on which DLCI is configured. 

RxBelowCIR 
Packets/Octets/Tx Packets

Number of packets/octets received below the committed 
information rate (CIR), and number of Tx packets 
transmitted.

RxAboveCIR 
Packets/Octets/Tx Drops

Number of packets/octets received that exceeded the 
CIR, but were within the allocated burst rate (BR), and 
number of packets that should have been transmitted, but 
that were dropped due to lack of buffering resources.

RxAboveBR 
Packets/Octets/Tx Octets

Number of packets/octets received that exceeded the 
allocated BR and number of octets transmitted.