PROSCAN psvr71 사용자 가이드
36
Recording
8. To edit segments that you do not want to copy:
•
Press PAUSE on
recording VCR to pause copying.
•
Locate the next segment you want to copy on
playback VCR by
using FWD, REV, and PLAY, and then press PAUSE.
•
Press PAUSE on
both VCRs at the same time to resume copying.
9. Press STOP on
both VCRs when you are finished.
Using Dual Remote with AutoEdit
Use this VCR as the
playback VCR and set it to respond to VCR2
on the remote as described in
Setting Up the VCR section. Use your
other compatible VCR as the
recording VCR, which should respond
to VCR1.
1. Follow step 1–4 in the “Using Two VCRs for Copying and Editing
Tapes.”
2. Press VCR1 on remote to control
recording VCR. Press RECORD
(REC), then PAUSE, to put recording VCR in pause mode.
3. Press VCR2 on remote to control
playback VCR.
4. Use FORWARD, REVERSE, and PLAY to locate the point where
you want to begin copying. Press PAUSE while VCR is playing to
put
put
playback VCR in pause mode.
5. Press EDIT on remote to start the VCRs copying.
6. Press EDIT again when you want to pause copying.
7. Repeat step 4–6 as needed.
8. Press VCR1, STOP, then VCR2, STOP, when you are finished.