SATO CG412 사용자 가이드
Section 7: Interface Specifications
Page 7-12
CG4 Series Operator Manual
7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont’d)
7.5.2 Software Specifications
ProtocolTCP/IP
Network layerARP, RARP, IP, ICMP
Session layerTCP, UDP
Application layerLPR, FTP, TELNET, BOOTP, DHCP, HTTP
Network layerARP, RARP, IP, ICMP
Session layerTCP, UDP
Application layerLPR, FTP, TELNET, BOOTP, DHCP, HTTP
Notes
• Send the print data by LPR and FTP of TCP/IP and dedicated socket protocol. (STATUS3, Protocol for
driver (STATUS4))
• Use socket connection to get the printer status.
Communication
configuration
configuration
The following settings can be configured via the Printer configuration tool or com-
mands.
mands.
Item
Command
Setting range
LAN mode
<I3>
Protocol for driver (STATUS4) cyclic
response mode *
response mode *
1
Protocol for driver (STATUS4) ENQ
response mode *
response mode *
1
STATUS3 *
2
IP address
<W1>
0.0.0.0 ~ 255.255.255.255
Subnet mask
<W2>
0.0.0.0 ~ 255.255.255.255
Gateway address
<W3>
0.0.0.0 ~ 255.255.255.255
IP address setup
<WI>
Manual
DHCP
DHCP
RARP
<WM>
RARP disabled
RARP enabled
RARP enabled
*
1
*
2
2-port connection by Port1024 and Port1025 or 1 port connection by
Port9100.
1 port connection by Port1024 or Port9100.
Port9100.
1 port connection by Port1024 or Port9100.
Maximum receive
buffer capacity
buffer capacity
1MB
Buffer near full
Buffer near full
0MB
1MB
Remaining 0.25MB
Remaining 0.5MB
occurred
released