Plus bf-030 s 작동 가이드
4
BEFORE USE...
HOW TO USE
WHEN COPYING...
Cut-off Recording Paper
When copying is completed, pull the tip of the recording
paper upwards and cut it off with the edge of the outlet.
paper upwards and cut it off with the edge of the outlet.
When copying reduced two-surfaces:
Press two-surface reduction copy key. At this time the board
screen slides forward two pages, and the written contents are
reduced to A4 size and copied.
screen slides forward two pages, and the written contents are
reduced to A4 size and copied.
When copying one surface:
Press the one-surface copy key. At this time the board screen
slides forward one page and the written contents are copied
onto A4 paper.
slides forward one page and the written contents are copied
onto A4 paper.
POWER
POWER ON
PAPER OUT
Press the caster lock switches ON and keep
the casters in a locked position.
Plug in and turn ON the power switch. After
the power lamp blinks for 2-3 seconds, it
should turn green.
the casters in a locked position.
Plug in and turn ON the power switch. After
the power lamp blinks for 2-3 seconds, it
should turn green.
Press the feed/stop key to half the copying operation
immediately. The printer stops after completion of copying
up to that point.
immediately. The printer stops after completion of copying
up to that point.