Plus bf-030 s 작동 가이드

5

It is also possible to slide the board screen manually. In
this case, it can be slid in either direction; to the right and
left. However, manual sliding at an excessively high speed
must be avoided as it occasionally causes problems.

Press the feed/stop key. Then, the board screen slides to
the left by one page and stops. It stops immediately when
the feed/stop key is pressed during the sliding operation.

Take out the core left over from the thermal paper.

Replace with new recording paper in the following cases:

When a red line appears at the end of the recording paper.(A
red line appears when only about one meter or so of

recording paper is remaining.)

When the paper warning lamp lights red.