Wintal pvr-x2 사용자 가이드

 

 

22

Select this feature to complete an automatic scan, finding all available 

channels and storing them in memory. This is sometimes necessary if you 

move house or new channels are established. 

 

While running Auto Search, the system 

begins to search programs using a preset 

channel plan. As DVB-T channels are found, 

the program search results are displayed. A 

bar at the bottom of the window reflects the 

signal quality of each frequency as it scans. 

When the search is completed, the TV and 

Radio programs found will be added to the program list and arranged under 

categories. 

 

Only Use Manual Search if you are familiar with the relevant parameters.   

In Manual Search mode, only one RF channel 

is added at a time. 

Channel NO: Press 

 to select with 

channel you wish to search for.  Frequency 

(KHz):  This value varies the according to the 

Channel no. being tuned, however, it can also 

be adjusted using the numeric keys.   

Band Width: Select 7MHz, 8MHz or 6MHz.   

NIT: By pressing 

  keys, you can switch NIT ON or OFF. 

LCN (Logical Channel Numbering): By pressing 

  keys, you can switch 

LCN ON or OFF. If LCN is ON, then all the channels will be listed according 

to their logical channel number.