3com 8807 참조 가이드
ACL Commands
219
slot slotid: Displays the flow template applied on the specified card.
user-defined: Displays the user-defined flow template.
Description
Use the display flow-template command to view the detailed configuration of
flow template. The configuration includes which parameters the flow template
defines and which ports/cards is the flow template applied on.
flow template. The configuration includes which parameters the flow template
defines and which ports/cards is the flow template applied on.
3Com Switch 8800 Family Series Routing Switches (hereinafter referred to as
Switch 8800 Family series) support two flow templates: one is user-defined; the
other is the default one. If you do not input any parameter for this command, the
detailed configuration of all flow templates will be displayed.
Switch 8800 Family series) support two flow templates: one is user-defined; the
other is the default one. If you do not input any parameter for this command, the
detailed configuration of all flow templates will be displayed.
Related command: flow-template user-defined.
Example
# Display information about the default flow-template.
<SW8800> display flow-template default
default flow template : ip-protocol tcp-flag sport dport icmp-type
icmp-code sip 0.0.0.0 dip 0.0.0.0 vlanid
display time-range
Syntax
display time-range { all | name }
View
Any view
Parameter
all: Displays all time ranges.
name: Time range name, string starting with an English letter ([a-z, A-Z]) and in
the range of 1 to 32 characters.
the range of 1 to 32 characters.
Description
Use the display time-range command to view the configuration and status of
current time range. For active time range, the system shows "active" and
"inactive" for inactive time range.
current time range. For active time range, the system shows "active" and
"inactive" for inactive time range.
A delay, about one minute, exists in system’s updating ACLs, but the result of the
display time-range command is based on the current time. Then there may the
case where a time range have been shown active using the display time-range
command, while it is still inactive in importing the ACL. You just take it as a normal
case.
display time-range command is based on the current time. Then there may the
case where a time range have been shown active using the display time-range
command, while it is still inactive in importing the ACL. You just take it as a normal
case.
Related command: time-range.
Example
# Display all time ranges.
<SW8800> display time-range all
Current time is 14:36:36 4-3-2003 Thursday