3com WX1200 빠른 설정 가이드
2
M
OBILITY
S
YSTEM
S
OFTWARE
Q
UICK
S
TART
G
UIDE
6
Click Start to begin. The wizard screens guide you
through the configuration steps. Each screen has
online help to guide you through the configuration.
through the configuration steps. Each screen has
online help to guide you through the configuration.
7
After guiding you through the configuration, the
wizard displays a summary of the configuration values
you selected. Here is an example:
wizard displays a summary of the configuration values
you selected. Here is an example:
8
Review the configuration settings, then click Finish to
save the changes, or click Back to change settings. If
you want to quit for now and start over later, click
Cancel.
save the changes, or click Back to change settings. If
you want to quit for now and start over later, click
Cancel.
If you click Finish, the wizard saves the configuration
settings into the switch’s configuration file. If the
switch is rebooted, the configuration settings are
restored when the reboot is finished.
settings into the switch’s configuration file. If the
switch is rebooted, the configuration settings are
restored when the reboot is finished.
The switch is ready for operation. You do not need to
restart the switch.
restart the switch.
CAUTION: On a WXR100, do not press the Fn switch
for more than four seconds! On a WXR100 that is
fully booted, the Fn switch erases the configuration if
held for five seconds or more. If you do accidentally
erase the configuration, you can use the Web Quick
Start to reconfigure the switch.
for more than four seconds! On a WXR100 that is
fully booted, the Fn switch erases the configuration if
held for five seconds or more. If you do accidentally
erase the configuration, you can use the Web Quick
Start to reconfigure the switch.
Remotely Configuring a Switch Using 3WXM
(any model)
(any model)
This installation option requires someone to
preconfigure the switch in a 3WXM network plan and
someone to physically install and power on the switch.
preconfigure the switch in a 3WXM network plan and
someone to physically install and power on the switch.
Preconfigure the Switch in 3WXM
If you know the switch’s serial number, use the
following procedure to set up the switch’s
configuration in 3WXM.
following procedure to set up the switch’s
configuration in 3WXM.
1
Start 3WXM Services.
2
Start a 3WXM client and connect to 3WXM Services.