3com S7906E 설치 설명서

 

1-12 

For the parameters configured on both sides for ORF capability negotiation, refer to 

. 

Follow these steps to enable the MBGP ORF capability:  

Enter system view 

— 

Enter BGP view 

bgp as-number 

— 

Enable BGP route refresh for a 
peer/peer group 

peer { group-name | 
ip-address } 
capability-advertise 
route-refresh 

Optional 

Enabled by default 

If this feature is not enabled, 
you need to configure this 
command.  

For details about the command, 
refer to BGP Commands in the 
IP Routing Volume.  

Enable the non-standard ORF 
capability for a BGP peer/peer 
group 

peer { group-name | 
ipv6-address } 
capability-advertise orf 
non-standard 

Optional 

By default, standard BGP ORF 
capability defined in RFC 5291 
and RFC 5292 is supported. 

If this feature is not enabled, 
you need to configure this 
command.  

For details about the command, 
refer to BGP Commands in the 
IP Routing Volume. 

Enter MBGP address family 
view 

— 

Enable the ORF IP prefix 
negotiation capability for a BGP 
peer/peer group 

peer { group-name | 
ip-address } 
capability-advertise orf 
ip-prefix { both | receive | 
send } 

Optional 

Not supported by default 

 

Table 1-1 Description of the both, send, and receive parameters and the negotiation result 

send 

The ORF sending capability is enabled locally 
and the ORF receiving capability is enabled on 
the peer. 

receive 

The ORF receiving capability is enabled 
locally and the ORF sending capability is 
enabled on the peer. 

both 

Both the ORF sending and receiving 
capabilities are enabled locally and on the 
peer, respectively. 

 

Follow these steps to configure the number of MBGP routes for load balancing: