Инструкции По Установке для 3com S7906E
1-12
For the parameters configured on both sides for ORF capability negotiation, refer to
.
Follow these steps to enable the MBGP ORF capability:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp as-number
—
Enable BGP route refresh for a
peer/peer group
peer/peer group
peer { group-name |
ip-address }
capability-advertise
route-refresh
ip-address }
capability-advertise
route-refresh
Optional
Enabled by default
If this feature is not enabled,
you need to configure this
command.
you need to configure this
command.
For details about the command,
refer to BGP Commands in the
IP Routing Volume.
refer to BGP Commands in the
IP Routing Volume.
Enable the non-standard ORF
capability for a BGP peer/peer
group
capability for a BGP peer/peer
group
peer { group-name |
ipv6-address }
capability-advertise orf
non-standard
ipv6-address }
capability-advertise orf
non-standard
Optional
By default, standard BGP ORF
capability defined in RFC 5291
and RFC 5292 is supported.
capability defined in RFC 5291
and RFC 5292 is supported.
If this feature is not enabled,
you need to configure this
command.
you need to configure this
command.
For details about the command,
refer to BGP Commands in the
IP Routing Volume.
refer to BGP Commands in the
IP Routing Volume.
Enter MBGP address family
view
view
ipv4-family multicast
—
Enable the ORF IP prefix
negotiation capability for a BGP
peer/peer group
negotiation capability for a BGP
peer/peer group
peer { group-name |
ip-address }
capability-advertise orf
ip-prefix { both | receive |
send }
ip-address }
capability-advertise orf
ip-prefix { both | receive |
send }
Optional
Not supported by default
Table 1-1 Description of the both, send, and receive parameters and the negotiation result
Local parameter
Peer parameter
Negotiation result
receive
send
both
The ORF sending capability is enabled locally
and the ORF receiving capability is enabled on
the peer.
and the ORF receiving capability is enabled on
the peer.
send
receive
both
The ORF receiving capability is enabled
locally and the ORF sending capability is
enabled on the peer.
locally and the ORF sending capability is
enabled on the peer.
both
both
Both the ORF sending and receiving
capabilities are enabled locally and on the
peer, respectively.
capabilities are enabled locally and on the
peer, respectively.
Configuring the Maximum Number of MBGP Routes for Load Balancing
Follow these steps to configure the number of MBGP routes for load balancing: