3com S7906E 설치 설명서
1-14
Task
Remarks
Required
Configuring
an MPLS TE
tunnel
an MPLS TE
tunnel
Required
Use either
approach
Use either
approach
Optional
Optional
Optional
Required
Use any approach
Use any approach
Optional
Optional
Optional
Configuring MPLS TE Basic Capabilities
MPLS TE basic capabilities are essential to MPLS TE feature configurations. After configuring the basic
capabilities, you need to make other configurations in order to use MPLS TE depending on the actual
requirements.
capabilities, you need to make other configurations in order to use MPLS TE depending on the actual
requirements.
Configuration Prerequisites
Before the configuration, do the following:
z
Configure static routing or IGPs to make sure all LSRs are reachable.
z
Configure MPLS basic capabilities.
For configuration information about MPLS basic capability, refer to MPLS Basics Configuration in the
MPLS Volume
.
Configuration procedure
Follow these steps to configure MPLS TE basic capabilities:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter MPLS view
mpls
––