3com S7906E 설치 설명서

 

1-17 

In system view 

dot1x supp-proxy-check 
{ logoff | trap } interface 
interface-list 

interface interface-type 
interface-number 

Enable the 
proxy 
detection 
function on 
one or more 
ports 

In Ethernet 
interface view 

dot1x supp-proxy-check 
{ logoff | trap } 

Required 

Use either approach. 

Disabled by default 

 

z 

The proxy detection function requires the cooperation of an 802.1X client. 

z 

For the proxy detection function to take effect on one or more ports, you need to enable the function 

both globally and on the ports. 

 

With the 802.1X multicast trigger function enabled, a port will periodically send multicast messages to 

clients to initiate authentication. This function is used for clients that cannot initiate authentication 

unsolicitedly. 

Follow these steps to configure the multicast trigger function: 

Enter system view 

— 

Enter Ethernet interface view 

interface interface-type 
interface-number 

— 

Enable the multicast trigger 
function 

dot1x multicast-trigger 

Optional 

Enabled by default 

 

With the 802.1X unicast trigger function enabled, the device sends unicast packets out a port on which 

it received a data frame whose source MAC address is not listed in the MAC address table.  

Follow these steps to configure the unicast trigger function: 

Enter system view 

— 

Enter Ethernet interface view 

interface interface-type 
interface-number 

— 

Enable the unicast trigger 
function 

dot1x unicast-trigger 

Optional 

Disabled by default